Learn more in this section about
- which measurement devices are supported
- how to set up your device
- how to select settings for specific measurements parameters
1. Introduction
Measurement Devices are used to carry out Profiling (Color Setup) and to measure colour values, which spectrally record reflected light. Using the measured spectral values, all information required for the description of colors in the Workflow can be extracted.
The following measurement devices can be used in connection with the Workflow. Note that you have to make sure that the firmware is up-to-date, and also confirm that the current drivers are installed. You can download current drivers from the respective manufacturers' websites.
2. Barbieri Electronics
| Model | Firmware Version | Driver Version |
|---|---|---|
|
Spectro LFP Series 1 – only with measurement table |
v3.78, some devices will be updateable to v5.20. Please contact your Barbieri reseller. |
4.0.0.84 |
|
Spectro LFP Series 2 – only with measurement table |
v5.20 |
4.0.0.84 |
|
Spectro LFP Series 3 – only with measurement table |
v5.20 |
4.0.0.84 |
|
Spectro Swing – self-feeding automatic measurement |
v4.19e |
4.0.0.84 |
|
SpectroPad – handheld device |
v6.26 |
4.0.0.84 |
|
Spectro LFP qb (auto measurement) – w/ table |
Spectral Unit v6.73 Measurement Table v6.36 Camera v1.08 Transmission v6.01 |
4.0.0.84 |
|
Spectro LFP qb (Spot Measurement) – w/ handheld device |
Spectral Unit v6.73 |
4.0.0.84 |
|
Spectro SwingQB - self-feeding automatic measurement (available from version 1.18.0) |
Speclib v5.18 |
3. xRite
| Model | Firmware Version | Driver Version |
|---|---|---|
|
i1iO with i1Pro – using measurement table |
i1iO (Revision 1-3) v1.08 / i1Pro (Revision A-D) |
3.0.0 |
| i1Pro 1 - handheld device | Revision A-D | 3.0.0 |
|
i1iO with i1Pro2 – using measurement table |
i1iO (Revision 1-3) v1.08 / i1Pro2 (Revision E) |
3.0.0 |
| i1Pro2 - handheld device | Revision E | 3.0.0 |
| 1iO3 with i1Pro3 - using measurement table | Revision A |
3.0.0 |
| 1iPro3 - handheld device |
Revision A |
3.0.0 |
| i1iO3 with i1ro3 Plus - using measurement table |
Revision A |
3.0.0 |
| i1Pro3 Plus - handheld device |
Revision A |
3.0.0 |
4. Konica Minolta
| Model | Firmware Version | Driver Version |
|---|---|---|
|
FD-9 – Self-feeding measurement device, for longer templates |
v1.12 |
|
|
CM-2300d – measurement device for glass surfaces |
||
|
Konica Minolta - MYIRO-9 |
||
|
ColorScout with KonicaMinolta - CM2300d - Color Scout measurement table |
5. Techkon
| Model | Firmware Version | Driver Version |
|---|---|---|
|
Spectroens |
16.10 |
Article update: Version 1.17.0 - 02/2024