User ManualAdministration Measurement DevicesSupported Measurement Devices

Supported Measurement Devices

Administration > Measurement Devices

Availability: All Versions

Measurement Devices are used to carry out Profiling (Color Setup) and to measure colour values, which spectrally record reflected light. Using the measured spectral values, all information required for the description of colors in the Workflow can be extracted.

Learn more in this section about

  • which measurement devices are supported
  • how to set up your device
  • how to select settings for specific measurements parameters

The following measurement devices can be used in connection with the Workflow. Note that you have to make sure that the firmware is up-to-date, and also confirm that the current drivers are installed. You can download current drivers from the respective manufacturers' websites.

Model Firmware Version Driver Version
Spectro LFP Series 1 – only with measurement table
v3.78, some devices will be updateable to v5.20. Please contact your Barbieri reseller.
Gateway v4.4
Spectro LFP Series 2 – only with measurement table
v5.20
Gateway v4.4
Spectro LFP Series – only with measurement table
v5.20
Gateway v4.4
Spectro Swing – self-feeding automatic measurement
v4.19e
Gateway v4.4
SpectroPad – handheld device
v6.26 Gateway v4.4
Spectro LFP qb (auto measurement) – w/ table
Spectral Unit v6.73
Measurement Table v6.36
Camera v1.08
Transmission v6.01
Gateway v4.4
Spectro LFP qb (Spot Measurement) – w/ handheld device
Spectral Unit v6.73
Gateway v4.4

2. xRite

Model Firmware Version Driver Version
i1iO with i1Pro – using measurement table
i1iO (Revision 1-3) v1.08 / i1Pro (Revision A-D)

i1iO with i1Pro2 – using measurement table
i1iO (Revision 1-3) v1.08 / i1Pro2 (Revision E)

i1Pro – handheld device
Revision A-D

i1Pro2 – handheld device
Revision E

3. Konica Minolta

Model Firmware Version Driver Version
FD-9 – Self-feeding measurement device, for longer templates
v1.12

CM-2300d – measurement device for glass surfaces