Find out in this Article,
- which requirements must be met for this Fixup and
- how to apply this Fixup.
1. Introduction
The Fixup Set PageBox to TrimBox is available in the Workflow. This Fixup aims to set or delete the BleedBox, the CropBox and the MediaBox starting from the TrimBox.
2. General
Use the Fixup Set Page Box to TrimBox to set the Page Box to match the TrimBox. The BleedBox and CropBox can remain unchanged, be deleted or offset relative or absolute from the TrimBox frame. The same applies to the MediaBox, although this box cannot be deleted as the MediaBox must be present in every PDF file.
The Fixup can be found in the Data Preparation tab of an Article, Order or Production Job by
- Entering the name of the Fixup in the Filter area,
- Activating the Page Box option in the Category area,
- Activating the Change option in the Action area and by
- Activating the option MediaBox, BleedBox, CropBox or TrimBox in the Search area.
3. Description
With this Fixup, set the BleedBox, CropBox and MediaBox to match the TrimBox. The users can decide for themselves whether the respective boxes should remain unchanged, be deleted or set relative or absolute to the TrimBox.
3.1. Requirements and Functionality
In order for the Fixup to do what it promises, the following situation must exist:
- There is already a TrimBox in the PDF file.
- The TrimBox is in the correct position in the PDF.
3.1.1. Actions
Actions are available for each Page Box that can be changed, with which the respective Page Box either remains unchanged, is removed or can be set relative or absolute to the TrimBox.
The user can choose between the following actions [2]:
- Leave Unchanged – the respective Page Box remains unchanged. No further options can be selected.
- Remove PageBox – the respective Page Box is deleted and removed from the file. No further options can be selected.
- Set Relative – the respective Page Box can be set relative to the TrimBox. Specify the offset to the TrimBox for Top, Bottom, Left and Right [3] separately.
- Set Absolute – the respective Page Box can be set absolute by entering the desired size. Set the selected Page Box by specifying the height [8] and width [5]. The position of the Page Box is set from the center of the TrimBox.
Figure 1: The dialog of the Fixup Set PageBoxes to TrimBox
Use the following options to edit or set new Page Boxes:
- Template [1] – save settings that are selected in the dialog as a template so that they can be applied to other Articles/Print Items.
CropBox
- Action [2] – select the desired action for the respective box here. If Set Relative is selected, access to the following options is possible.
- Offset [3] – if the Set relative action is activated, the respective box can be set relative to the TrimBox box. To do this, enter the desired Offset for Top, Left, Bottom and Right to the TrimBox. For the Variable Content [7], select the desired placeholder - database field or user-defined field - from which the value for the offset should be retrieved.
MediaBox
- Action [4] – select the desired action for the Page Box here. If the Set Absolute action is selected, refer to the options below.
- Width [5] – enter the desired width for the Page Box here. Please note that the selected box is set centered to the TrimBox. For the Variable Content [6], select the desired placeholder - database field or user-defined field - from which the value for the width should be retrieved.
- Height [8] – enter the desired height for the Page Box here. Please note that the selected box is centered in relation to the TrimBox box. For the Variable Content [9] – select the desired placeholder - database field or user-defined field - from which the value for the width should be retrieved.
3.2. Before/After
To experiment with this function, refer to the sample file "Sample_Set PageBoxes to TrimBox.pdf". The file has a size of 100 x 100 mm. All Page Boxes are the same size. The CropBox and MediaBox should be extended by 2 mm per page for this example.
After applying the Fixup, the file "Sample_Set PageBoxes to TrimBox_End.pdf" is created. The values from Figure 1 were used here.
Figure Left: initial file, opened in the Print Item Editor; Right: revised file, where the Page Boxes have been edited, opened in the Print Item Editor.
Article update: Workflow 1.18.0 – 08/2024